ZNC Die Sinker EDM Series
Programmable CNC control; an average power output circuit design as well as traditional machine, it brings a steady, low electrode wear and fine finish processing on the job and more.
Features
| Specifications | ||
| Model | Unit | CM323Z |
| Table size (WxD) | mm/inch | 500×350/19.7×13.8 |
| Table travel (XxY) | mm/inch | 300×200/11.8×7.9 |
| U,V axis travel (OB) | mm | ±5 |
| Work tank size (WxDxH) | mm/inch | 820×500×300/32.2×19.7×11.8 |
| Ram travel (Z1) | mm/inch | 300/11.8 |
| Distance form RAM platen work table | mm/inch | 250~550/9.8~21.7 |
| Max. electrode weight (without OB) | kg/lb | 60/132 |
| Max. electrode weight (with OB) | kg/lb | 15/33 |
| Max. workpiece weight | kg/lb | 500/1100 |
| Outside dimensions (WxDxH) | mm/inch | 1300×1300×2150/51.2×51.2×84.6 |
| Weight | kg/lb | 1000/2200 |
| For Dielectric | – | D323 |
| Power Supply Unit | |||||
| Model | Unit | 50EZ | 75EZ | 50B Booster | 75B Booster |
| Max. machining current | A | 50 | 75 | 50 | 75 |
| Max. power input | KVA | 4 | 5 | 4 | 5 |
| Max. machining speed | mm3/min | 350 | 550 | 350 | 550 |
| Electrode wear rate | % | 0.2 | 0.2 | – | – |
| Best surface roughness | μm/Ra | 0.45/0.2 (OB) | 0.45/0.2 (OB) | – | – |
| Outside dimensions | mm | 620×720×1860 | 620×720×1860 | 450x470x1650 | 450x 470x 1650 |
| Weight | kg/lb | 200/440 | 240/528 | 200/440 | 240/528 |
| Dielectric | ||
| Model | Unit | D323 |
| Volume | L | 280 |
| Filter | method | Paper filter |
| Pump Power | HP×set | 0.5×1 |
| Weight | kg | Buit in |
| Outside dimensions | mm | Buit in |
© EDM Sales & Supplies, Inc.- All Rights Reserved
